Orbi RBE770 Router Setup: A Step by Step Guide

The Netgear Orbi RBE770 router is a next-generation WiFi device that provides 3 WiFi radio frequencies with WiFi 7 technology.

2 GHz—it supports 1024-QAM with 688 Mbps.

5 GHz—it offers 4K-QAM and a 240 MHz channel width with 4320 Mbps.

6 GHz—6 GHz supports the new standard with 4K-QAM and a 320 MHz channel width of 5760 Mbps.

Through this blog, we teach you with step-by-step instructions to complete the Orbi RBE770 router setup process. Let’s begin without any delay:

Steps to Complete Orbi RBE770 Router Setup

There are two ways to set up the Orbi RBE770 router at home: first is via the web interface and second is with the Orbi app. You can use any one as per your requirement. But before you can use any of these, you need to follow some common steps. Steps are:

• Unpack the router if you are purchasing new.
• Install the router at a centred location in your house.
• Take an Ethernet cable to attach it to the modem.
• Plug the power adapter into the router and then into the power socket.
• Give power to the router as well as the modem.

When you complete all the above steps, then you will have done the Orbi RBE770 router setup through any methods given below.

Via Web Interface

• First, attach the device to the router’s network.
• Then visit the Orbilogin portal by entering orbilogin.com or 192.168.1.1 into the address bar of the browser.
• Now the login screen will open on the computer screen.
• Check the user manual or label for the username and password.
• And enter it into the login field, and click on the LOGIN button.
• When you enter the interface of the router, set up the router by following onscreen instructions

These steps help you to access the web interface of the Orbi RBE770 router. On this interface, you can manage different types of settings according to your requirements. This interface also allows you to enable and manage Orbi parental controls.

With Orbi App

• Same as above, connect your mobile device to the network of the router.
• Get the Orbi app from any platform that is suitable for you.
• Open the app; it will ask for login credentials.
• Here you will create an account or use the default login detail mentioned in the manual.
• After entering correct login details, you will enter into the app interface.
• Then, configure your router by entering its model and serial number.

On this app, you can also update the Orbi firmware, see the devices list that are connected to the router, and change the admin and network passwords.

Conclusion

Hope after reading this blog you understood what the Orbi RBE770 router is, how it works, and how to complete the Orbi RBE770 router setup process at home.