Every Netgear Orbi router comes embedded with a software. This software looks over the functionality of the Orbi. It is called firmware. Performing Orbi firmware update is known to fix bugs and errors. Not just that, but it also enhances the performance of the Orbi if upgraded timely.
In this post, we have covered different methods using which Netgear Orbi firmware update can be performed. Read on.
The manual method is used by a number of users to perform Netgear Orbi firmware update. You should consider using it too.
Here is how upgrading the Orbi firmware is possible manually:
Note: Need help in syncing your Netgear Orbi router and Orbi satellite? Consider contacting our technical experts immediately.
After performing Netgear Orbi firmware update, you can take advantage of the latest features added to your device.
As mentioned above, there are different ways through which a user can perform Netgear Orbi firmware update. Apart from the Manual method, using the Orbi app is another way with which Orbi firmware upgrade is possible.
The following steps will easily help you upgrade Orbi firmware via the Orbi app:
The last step has concluded the process of Netgear Orbi firmware update via the Orbi app. If you found it a little difficult to execute, why don’t you contact our tech team? Surely they will help you do something about this issue.
If you are amongst those users who want to try to resolve the Netgear Orbi firmware update failure issue on their own, then you shouldn’t waste any more time following the fixes highlighted here:
Reboot is just a fancy word for restart. If you haven’t given your Netgear Orbi router a restart, then the time has come for you to do the honors now.
To reboot your Orbi, you do not have to do much. All this process requires is that you turn off your Netgear Orbi, wait for as long as needed, and then, turn it back on.
After rebooting your device, try to perform Orbi firmware. Were you able to fix it? No? In that case, continue reading this guide.
Remember the time when you connected your devices using a source? Was it wired? As in did you use an Ethernet cable? If yes, then did you not check for damages?
Don’t pout. You still have time to rectify this mistake by swapping the old cable with a new one. What happened? You don’t want to step out of your house to buy a new cable? No problem. In that case, feel free to connect the devices wirelessly.
Many users do not pay attention to the fact that keeping the Orbi router and the modem far from each other can make them difficult to communicate thereby causing a number of technical issues.
Therefore, make sure the distance between your devices is not more than it should be. But, also ensure that they are not placed neck to neck, otherwise, it might lead to a clash of their signals.
There is a possibility that your Netgear Orbi router is not properly synced to the Orbi satellite due to which you aren’t able to upgrade the firmware of your device.
Therefore, take our advice and re-sync your Orbi devices. To do so, you need to press the Sync button on your Orbi router as well as the satellite.
Have a look at the web address that has been used by you. Is it correct? Does it have typing errors? If the second scenario is true, then it is recommended you type the web address again where it is required. Are you not sure about the default web address of your Netgear Orbi router? Well, why wait to gain knowledge when you can contact our team and gain access to it?
Another thing that can help you troubleshoot the Netgear Orbi firmware update failure issue is upgrading your existing browser to its most recent firmware.
When was the last time that you upgraded your browser? Well, it doesn’t matter now considering the only thing that will work for you in this case is updating your browser. Therefore, follow the instructions mentioned below to execute the process:
Click the three-dotted option located at the right corner of your screen.
Note: The process to update different internet browsers is more or less the same. The one mentioned above is of Google Chrome.
In order to perform Netgear Orbi firmware update, you need to access the BASIC Home screen using the login credentials. But, in case you haven’t used the correct admin details, then the cause is quite visible why you are not able to upgrade the Orbi firmware.
To take care of this thing, our experts recommend that you use the correct username and password. Need help in remembering them or finding what the default ones are in case you haven’t changed them? Well then, you should contact the people who recommended this fix to you in the first place.
Last, but not least, see to it that your Netgear Orbi router is not kept near any device or appliances that can interfere with its signals. Some of their examples include:
Apart from this, keeping your Orbi router in corners and near concrete walls can stop you from performing Netgear Orbi firmware upgrade. Therefore, maintain a safe distance between your Orbi device and them.
If you are someone who wants to skip the manual method for Netgear Orbi firmware update, then it is recommended that you enable the Orbi auto firmware update option. You can do so by following the below-given steps:
Although performing Netgear auto Orbi firmware update is not that difficult, but, in case, you still feel that it is, then don’t hesitate to reach out to our technical experts. They are not concerned about what time you contact them as they are always available to help our users struggling with Orbi firmware update-related issues.