How to Setup Orbi RBR760 Mesh Router?

Orbi mesh systems consist of more than two devices one is Orbi router and others are satellites. Here, you will get to know about the Orbi RBR760 setup (router), and how to configure it. After the configuration, you can easily use a lot of features like Orbi parental controls, Access controls, Guest network settings and much more.

Orbi RBR760 Setup

The mesh WiFi router connection is easy with any home network link with any brand cable modem. Below, you will get to know how to setup the Orbi RBR760 router in home with the help of simple instructions.

How to Connect RBR760 to Network?

• You must use the Ethernet cable to make a connection within Orbi devices and home modem.
• Connect one end of the extender to Orbi router Yellow port (WAN port), and other to the modem LAN port.
• Make sure that the cable is in fine condition and is connected correctly. Then you can turn on the devices after a final check.

If you have any Orbi satellites to connect with the router, then you can do it as well. Just turn on the satellites, and press the Sync button on the router as well as the satellites. After some minutes, the devices will connect to each other.

How to Configure Orbi Mesh Network?

There are three ways to configure the Orbi mesh device;

1. Orbilogin.net

Start with connecting a computer or laptop to the Orbi network and open any updated web browser. Use the URL orbilogin.net, type it in the web address bar and the search it. You will reach to the orbilogin page, here you have to enter the username and password. The credentials are given on the label or in the user manual of the Orbi mesh router device.

By using the credentials, you will reach the interface window. Just follow on-screen instructions to complete the Orbi RBR760 setup.

2. Orbi App

Yes, the Orbi setup can also be completed with the help of your phone through the Netgear Orbi app. Just download it through the Play Store or App Store or Netgear website. Access the app using the admin credentials or MyNETGEAR account. You will get to the dashboard, where you complete the setup with ease by creating the network.

3. 192.168.1.1

Connect a computer or laptop to the Orbi network and open any updated web browser. Use the IP address 192.168.1.1, type it in the web address bar and the search it. You will reach to the login page, here you have to enter the username and password.

The credentials are given on the label or in the user manual of the Orbi mesh router device. By using the credentials, you will reach the interface window. Just follow on-screen instructions to complete the Orbi setup.

In the settings page, you can enable or disable features, initiate Orbi Firmware updates and much more.

The Conclusion

From this blog, you have learned how to complete the Netgear Orbi RBR760 setup in home without any company support.