What to Do If iRobot Roomba Won’t Connect to Orbi Router?

This guide will help you fix the WiFi connection issue with your iRobot Roomba vacuum cleaner. This smart home device requires a WiFi connection to operate. If there’s an issue connecting iRobot to WiFi, then you should address the problem instantly. Through this guide, we will provide you with troubleshooting solutions for iRobot Roomba that won’t connect to Orbi router.

iRobot Roomba Won’t Connect to Orbi Router (Fixed)

Before you head toward the troubleshooting part, check that your smart device has power.Verify this by observing the LEDs on it. If there’s no light lit this means it is not powered up or it is not charged. Press the CLEAN button on it to turn it on. If the cleaner is discharged then consider charging it and then connect to WiFi.

If a fully powered up device gives you a WiFi connection error, then try your hands on the solutions discussed here.

1. Check Orbi WiFi Router

You should now check if your Orbi router is working properly or not. Perhaps your Orbi is not able to provide internet to the device. Try connecting other devices to its WiFi. In case no other device can connect too then you should check Orbi’s power connection and its connection with the internet modem. You can also update Netgear Orbi firmware to the latest version to resolve the problem.

2. Power Cycle the Network

Are you still experiencing a WiFi connection issue between iRobot Roomba and Orbi router? We suggest you power cycle the network now.

Orbi:

• Unplug the Orbi router from its outlet.
• Plug it back after a couple of minutes.

iRobot Roomba:

• Press the CLEAN button for 10 seconds.
• The device will power off and turn on after some time.

When the Orbi router and Roomba device are both powered on, make a WiFi connection between them.

3. Reconnect to WiFi

Another successful solution that you can try if the previous one fails to help you is to try reconnecting the device to WiFi router.

• Open the app for your smart device.
• Go to Product Settings >WiFi Settings.
• Now select Reconnect or Change Product WiFi.
• Insert the Orbi router’s WiFi password and try to make the connection again.

4. Connect to 2.4 GHz Network

iRobot Roomba uses the lower frequency band i.e. 2.4 GHz. If your Orbi router is broadcasting only the upper band, 5 GHz, then this might cause connection issues. Therefore, access the Orbi login page to check the settings of the Orbi router and ensure that it broadcasts a 2.4 GHz network. While selecting the WiFi network, you must select the SSID for this specific band.

We suggest you move iRobot a little away from the router as the 2.4 GHz network has a better range when compared to the higher band. You should thus have no issues connecting to the correct WiFi network.

5. Reset iRobot Roomba

When everything else fails to help you out, you should go for a factory reset process. This wipes out all the customized data from the device. Perform a factory reset depending on the iRobot model that you own. Once done, you should give it a new start and connect it to your Orbinet work.

Wrapping Things Up

iRobot Roomba not connecting to Orbi router is a very common trouble that many users come across. Resolving it is no big deal if you apply the solutions discussed in this post. We are expecting that your iRobot Roomba is now connected to WiFi and you are able to use it as required.