An Informational Guide for Orbi AXE11000 Setup

Orbi router and satellites models RERE960, RBSE960, RBRE950, RBSE950 uses the AXE11000 WiFi 6 range. Here you will get to know how to the complete the Orbi AXE11000 setup using different methods.

Also, if you are having an old working model then you should perform Orbi factory reset process to clear all data.

Orbi AXE11000 Setup

Router Connection

You have to use the wired connection within your house. Place the Orbi router near to the home network modem. Then, use the Ethernet cable to make a connection. Plug the cable end to the router Yellow port (WAN port) and plug in other end to the modem LAN port. Then, you can power on the devices.

Satellite Connection

For the satellites to router link, you can use the Ethernet cable as well as the Sync button. Have a look how to connect with the most used wireless sync method;

• Power on the satellite on different locations of the house.
• Then, press the router Sync button on the router.
• Within 2 minutes press the satellite Sync button.
• The Orbi network will be established in your house.

Now, let’s see how to configure the Orbi AXE11000 mesh system;

Configuration

There are mostly two methods that you can use to adjust the settings and finish the setup in home. From this dashboard, you can easily Update Orbi firmware and manage networks.

Netgear Orbi App

The app is available on the famous Stores like Play Store or App Store as well as on the official website of the Netgear. Just download the app in your phone and then you have to access the app through the MyNETGEAR portal account credentials. If you are new on the app, then you can use the Admin username and password (given on the device label). Use the username and password, reach to the dashboard, and adjust the settings.

Orbilogin.net or IP

It is the most use methods to setup Orbi device within your home. Connect computer to the extender network via LAN or SSID wireless. Go in to the web browser and type in orbilogin.net or IP 192.168.1.1, now press Enter. You will get to the device login page, where you need username and password. The admin credentials are given on the extender label or user manual. Enter the credentials and click on Login button, you will reach to dashboard. From here, you can easily connect extender to the router and adjust the settings.

The End Lines

From this article, you have seen and learned about how to complete the Netgear Orbi AXE11000 setup.