Orbilogin Guide: When and How to Reset Your Orbi Satellite

If your Orbi satellite is constantly disconnecting and not synchronizing with the router, or is showing any error lights, or you are not able to perform Orbilogin a reset is the best solution. Over time, firmware, configuration, or signal issues may cause the satellite to behave oddly or might hinder the performance.

Resetting a device restores factory settings. This deletes all stored settings and allows you to start again. This guide will tell you when it is important to reset orbi satellite, how to do it well, and what to do thereafter to bring your network back to normal.

What else to do before a reset?

That’s a good question. Don’t reset just because your device is showing some glitches. A reset should be the last option. One should opt for reset when you’ve previously tried everything else and nothing else works:

• Turn it off and then back on again.
• Try placing it closer to the main Orbi router.
• Making sure your internet is still working.
• Updating the firmware

Still not working?

Here are several situations when you can reset orbi satellite:

• The satellite is not connecting to the main network, no matter how many times you try.
• The light is flashing in strange ways, such as always being purple or orange, even when it shouldn’t be.
• You’ve changed the name or password of your network, and now it isn’t connecting.
• It has relocated to a new house and won’t work there.
• You want to start again, like a blank slate. This is particularly beneficial after a huge firmware upgrade that went wrong.

Before you reset Orbi satellite, give this a quick try.

It’s not always the satellite. The router may be a hassle sometimes. Both need to be restarted. Wait for two to three minutes. Make sure they start up correctly. it’s excellent if this method works. Then, there will be no need to reset.

You can also use the Orbi app to verify whether the problem is with the satellite. It can say “offline” or “disconnected” next to the satellite, or it could say “Weak Signal.” If there are a lot of red flags there while you perform orbilogin, it’s time to reset orbi satellite.

How to Reset Orbi Satellite?

Let’s get started now. If you take your time and follow the guidelines, you’ll find this part really easy:

• Look for the Reset Button

Check out the rear of the Orbi satellite. There is a little hole with the word “RESET” on it. Yes, it’s little. You’ll need something sharp, like a paperclip or SIM pin.

• Turn on the satellite

Check that the satellite is plugged in and turned on. The power LED will turn on.

• Hold down the Reset button

Use your paperclip (or whatever you find) to push that button. Hold for 10–15 seconds. It’s pointless to give up too soon.

The light on the front will change color, generally to amber or flickering white. That’s the indicator that it’s resetting.

• Give it time to restart

Release the button and wait for a few minutes. It will flicker, then settle into a constant white light, signaling its readiness to connect to the network.

• Sync again with your router

Now, first push the Sync button on the router and then on the satellite. It will take around two minutes to locate each other. The satellite will change from flashing white to steady blue (if the connection is fine) or amber (if it’s bad). Try again if you see magenta. It means the connection didn’t work.

That’s all. Reset is done now!

The Device is Still Not Working?

Resetting a Device solves majority of problems. But sometimes, the reset too doesn’t work properly. Here are a few more options, that’ll make your device working like before:

• It’s too far away from the main router. Try bringing the satellite closer.
• There is interference from too many Bluetooth gadgets around, thick walls, microwaves, and fridges? All of these things may interfere with the signal.
• The router’s firmware could be old, and the satellite might be running something newer, or the other way around. They contradict to receive signals.
• Or to be honest, the device might be broken. It happens.

Additional Tips

• If you have more than one satellite, give them different names. When things go wrong, it saves a lot of trouble.
• Keep a paperclip near your modem or router. You will need it more than you think.
• Leave the device alone, while it’s synchronizing.

Anyways a reset shouldn’t be your very first option.

When your internet is down, you may panic, especially if you have work to do or the kids want to use a YouTube. Not all problems need starting again. Sometimes it’s only a short glitch. Give it a second. First, restart everything. Take a deep breath. Then choose a choice.

Don’t be frightened of the reset, but use it carefully. The worst case? You have to perform orbilogin again.

So, resetting your Orbi satellite isn’t that terrifying. Annoying? Yes. After learning when and how to execute it, you won’t feel helpless when it fails or when you perform Orbilogin again.
Don’t worry if it takes a few tries. Even techies make mistakes.

FAQs