Complete Guide of Orbi RBK653 Setup (Mesh WiFi 6 System)
January 13, 2025 / Mark Jenkins

Complete Guide of Orbi RBK653 Setup (Mesh WiFi 6 System)

One of the latest Netgear Orbi models is RBK653 which consist of a router (RBR750) and satellite (RBS350). Here, you will get to know about how to complete the Orbi RBK653 setup. You will learn how to link router and connect Orbi satellite to home network.

Orbi RBK653 Setup

Connect Orbi Router (RBR750)

  • You have to use the wired connection within your house.
  • Place the Orbi router near to the home network modem.
  • Then, use the Ethernet cable to make a connection.
  • Plug the cable end to the router Yellow port (WAN port).
  • Plug in other end to the modem LAN port.
  • Then, you can power on the devices.

    • Link Satellites (RBS350)

    • For the satellites to router link, you can use the Ethernet cable as well as the Sync button.
    • Power on the satellite on different locations of the house.
    • Then, press the router Sync button on the router.
    • Within 2 minutes press the satellite Sync button.
    • The Orbi network will be established in your house.

      • Configure Orbi Devices

      Via App

      • Orbi app is available on the famous Stores like Play Store or App Store.
      • You can also download it on the official website of the Netgear.
      • You have to access the app through the MyNETGEAR portal account credentials.
      • If you are new on the app, then you can use the Admin username and password.
      • Use the username and password, reach to the dashboard, and adjust the settings

        • Via Browser

        • It is the most use methods to setup Orbi device within your home.
        • Connect computer to the extender network via LAN or SSID wireless.
        • Go in to the web browser and type in orbilogin.net or IP 192.168.1.1, now press Enter.
        • You will get to the orbilogin page, where you need username and password.
        • The admin credentials are given on the extender label or user manual.
        • Enter the credentials and click on Login button, you will reach to dashboard.
        • From here, you can easily connect extender to the router and adjust the settings.

          • Solutions and Tips

          Change Orbi Password

          Access the Orbi interface using the IP address or URL or app (phone). Then go in to the Settings and select the Advanced settings. Here, you have to choose the Wireless Networks > enter the new SSID username and password. Now, apply these settings by clicking on the SAVE button.

          Adjust Frequency Channel

          Access the Orbi interface using the IP address or URL or app (phone). Then go in to the Settings and select the Advanced settings. Here, you have to choose the Wireless Networks > Frequency channels > select and change the band according to your house area.

          Reboot Orbi Network

          You can reboot the device. You just have to turn off and turn on the Orbi. There are two ways to do that:

          • Press the power button for two times and your device will reboot.
          • Plug the Orbi cord out and plug it in again in the electric wall socket.

            • End Words

            From this post, you have learned how to complete the Netgear Orbi RBK653 setup with the help of different methods along with tips and solutions.

Disclaimer: Orbitloginnet.com is an information provider for a large variety of third party products, brands and services. Any use of trademarks, brands, products and services is referential. Orbitloginnet.com hereby, disclaims any association, affiliation - direct or indirect, or representation in any form, of any such brand, product or service. Our services are provided only on request by users.