How-to-Setup-Netgear-Orbi-RBS760-AX5400--Orbilogin
February 6, 2025 / Mark Jenkins

How to Setup Netgear Orbi RBS760 AX5400- Orbilogin

There are so many Netgear Orbi satellites that you can connect with your Orbi home router. One of the Orbi satellite model is RBS760. Here, you will get to know about how to complete the Netgear Orbi RBS760 AX5400 setup.

Netgear Orbi RBS760 AX5400 Setup

The setup process starts with connecting the satellite to the Orbi router in your house. There are two methods one is through the Sync button and other is through the Ethernet backhaul. Sync is most used.

Place the RBS760 device at the desired position and turn it. Then press the router Sync button and within two minutes press the same button on the satellite. In few seconds, the devices will connect each other.

Now, you can begin the configuration process. Also, there are a few methods to adjust the settings of the device.

Via Orbilogin

The regular way for the Netgear Orbi RBS760 AX5400 setup is orbilogin interface. There are just a few steps to configure the device via interface:

  • 1.Connect a computer or laptop to the Orbi network.
  • 2.Open the web browser in the computer and search orbilogin.net.
  • 3.You will reach the interface login page where you have to enter the admin details.
  • 4.The regular ones that you use to set your Orbi router.
  • 5.Access the interface and set up your new satellite.

Via 192.168.1.1

The other way to reach to the Orbi login interface is default IP address of the device. the Orbi IP address is 192.168.1.1.

  • 1.Link the laptop to the Orbi and search 192.168.1.1 on the browser.
  • 2.Enter the admin username and password, and then reach to the interface.

Via Orbi App

Yes, along with the Nighthawk app for Nighthawk devices, Orbi has its own app. You can easily access the dashboard of the device with it. Just follow some points:

  • 1.Download the Orbi app from Play Store or App Store.
  • 2.Open and access the app through MYNETGEAR account login
  • 3.Reach to the dashboard and starts adjusting the RBS760 settings and networks.

Now, you should know how to change the WiFi password from the above given platforms and how to update them one by one.

Change WiFi Password

If you are using the Orbi app in your phone:

  • Access Orbi app > select the Settings of the network > choose Wireless Networks to open > Tap on the SSID > enter the new password > SAVE.

If you are using the web-based interface in computer:

  • Access interface through URL or IP address > Settings > Wireless Networks > click on the SSID column > enter new password > SAVE to apply.

Update Orbi Firmware

The Orbi app and interface, with both you can initiate Orbi firmware update. In Orbi app, you have to select the RBS760 model and go in to the Firmware tab > toggle the button of Automatic UPDATE to enable it. In the interface, go in to the Settings > Firmware > INSTAL.

Close Lines

In this article post, you have seen and learned about how to complete the Netgear Orbi RBS760 AX5400 setup within easy methods and instructions.

Disclaimer: Orbitloginnet.com is an information provider for a large variety of third party products, brands and services. Any use of trademarks, brands, products and services is referential. Orbitloginnet.com hereby, disclaims any association, affiliation - direct or indirect, or representation in any form, of any such brand, product or service. Our services are provided only on request by users.