How to Fix Orbi RBS850 Flashing Blue Light Issue?
Orbi users reside all across the world and they face different problems while using their Orbi despite the fact that the device provides an unmatchable internet experience. Recently, a user stated about his Orbi RBS850 flashing blue light out of nowhere. His satellite was placed on the first floor that was in the range of the router for sure. However, the satellite’s ring light pulses blue, stabilize, and go off after some time. This cycle then repeats which hinders access to his satellite via the Orbilogin address.
If the same is the case with you, then your Orbi satellite needs attention. In this post, you will find different solutions that will fix this weird issue with the satellite. Let’s get started!
Orbi RBS850 Flashing Blue Light: Reasons
The reasons why the light on your RBS850 satellite flashing blue are mentioned below. However, we would like to first of all, tell you about the primary reason why the issue has arisen. Know that the satellite flashes the color blue when the syncing process between the router and satellite is completed. This color must disappear after 3 minutes. But, if the aforementioned scenario occurs, the following might be reasons:
- The placement of your Orbi satellite is not done correctly.
- You have not updated the Orbi firmware of your router.
- The power supply to the RBS850 satellite is not stable.
- The satellite is stuck in a boot loop.
As we have discussed all the potential reasons behind the problem, it is now recommended that you give a read to the troubleshooting techniques provided in the next section.
Orbi RBS850 Flashing Blue Light: Troubleshooting
Place the Satellite Correctly
Your Orbi satellite needs to be present in an interference-free zone. By that, we mean, you should keep it in a ventilated room and away from a few devices and objects. Especially those emitting electromagnetic frequencies and objects containing a large amount of water must be kept at a few meters distance from the satellite. Keep the satellite away from reflexive surfaces.
Update the Router Firmware
The next tip in line is to update the Orbi router firmware. Know that an outdated firmware version of the router can put a satellite out of sync. Therefore, you should without any delay, access the web page of the router and update the firmware. Ensure that you do not disturb the process. Otherwise, you will have to check out instructions on how to reset Orbi router from the user manual and follow them.
Ensure Stable Power Supply to Satellite
Examine the power socket that is supplying power to your Orbi WiFi satellite. Is it free of all kinds of damages? No? Then, it is advised that you connect the Orbi RBS850 satellite to another outlet. But, make sure that you use the socket that lies within the range of the router or another satellite depending upon the network configuration you have made.
Reboot the Satellite
A stuck boot loop can be fixed by restarting the satellite. Thus, you are required to disconnect the power cord of the Orbi RBS850 satellite from its power outlet and wait for a few moments. Once done, you should reconnect the satellite to power outlet and notice the light behavior now. If you fail, factory reset Orbi satellite, and re-attempt the connection.
In Conclusion
It is now time to wrap up the guide that explained what to do to fix the Orbi RBS850 flashing blue light issue. We are hopeful that after trying these fixes, you will be able to get rid of the problem like it never existed.
