Update-Docker-Synology-A-Comprehensive-Guide
July 19, 2024 / Mark Jenkins

How to Connect to Your Orbi Router via Ethernet Connection?

Connecting the Orbi router via Ethernet connection is a very easy process. This process is called Ethernet Backhaul and it will require 2 or more Ethernet cables for the setup. The general setup for the router will remain the same no matter it is done via orbilogin.net or the mobile app.

Here, you will find instructions to connect to Orbi router using an Ethernet connection. But, before that, be certain that there is an ONT (Optical network terminal) or modem already installed. Setting up the Orbi mesh system will certainly require an internet connection.

Connecting to Orbi Router via Ethernet Connection

Depending upon the number of satellites available with the Orbi router, arrange Ethernet cables. Ensure to keep one extra for connecting the router and ONT. Once done, follow the setup instructions for the connection:

  • Launch the Orbi app.
  • If not downloaded yet, get the app at orbi-app.com depending upon the mobile OS you use.
  • Create a Netgear account in case you haven’t any.
  • It will require an email ID and password.

Note: Do not provide an email ID that is not in use. The reason being, the app might send you updates on the registered ID.

  • Select the model of the router that needs to be installed using an Ethernet connection.
  • Once done, connect the Internet port of the router to the LAN port 1 of the ONT.
  • Reboot the modem or ONT if the app says so.
  • After that, switch on the Orbi router.
  • Using the default SSID and WiFi password connect mobile phone to the router now.
  • Now, get back to the app and change the settings using the on-screen instructions.
  • Since you are creating an Ethernet Backhaul, connect the Ethernet ports of satellites to the Orbi router.

This is how to connect to Orbi router via Ethernet connection. The same steps can be followed on the web user interface too. Just in case, the connection fails, perform Orbi reset and connect satellites once again after setting up the router.

perform Orbi reset

How to Connect Devices to Orbi Using Ethernet Connection?

As satellites are connected to the router through Ethernet Backhaul, you won’t be able to connect wired devices to the router via cable. However, satellites will provide the same internet connection you will get through the router. Follow the steps given below for connection:

  • Ensure that Orbi mesh WiFi system is powered on.
  • Grab an Ethernet cable.
  • Find the available port on the satellite and connect an Ethernet cable there.
  • Bring Ethernet-enabled device like a laptop or a gaming station near the satellite and insert other end of the cable into the Ethernet port.
  • Be sure that the connection is finger-tight and that the cable used is free of damages.
  • Enjoy the lag-free internet connection.

To Sum Up

If summed up, the entire post says to arrange a well-working Ethernet cable and insert one end into the available Ethernet port of the Orbi device and other into the cabled device. This method can be used to connect Orbi satellites to the router as well as gaming consoles, televisions, laptops, desktops, etc. Hopefully, this blog has helped you create an Ethernet Backhaul successfully.

Disclaimer: Orbitloginnet.com is an information provider for a large variety of third party products, brands and services. Any use of trademarks, brands, products and services is referential. Orbitloginnet.com hereby, disclaims any association, affiliation - direct or indirect, or representation in any form, of any such brand, product or service. Our services are provided only on request by users.