Guide to Fix Orbi Firmware Check Error
It is a known fact that Netgear is a pioneer name in the networking devices industry. It uses cutting-edge technology to build the finest networking devices like routers, mesh systems, range extenders, etc. The Orbi mesh WiFi system is one of them. The saying “Beauty with brains” is apt for the Orbi mesh WiFi system. Not only does the Orbi system perform exceptionally well, but the look is also aesthetically good. There is no doubt about the fact that the looks justify the overall performance of the device. Anybody would just fall in love with it in the first go. If you own one such Orbi system, then getting its firmware updated regularly should be on your ‘To Do’ list for sure. While performing the firmware update process, if you are getting welcomed by the Orbi firmware check error, then this blog is all you need right now.
This blog is aimed to do away with this Orbi system error and help you update your device firmware.. Alternatively, you can chat with our expert team to assist you to get this issue fixed immediately.
Why Orbi Shows Firmware Update Error?
1. Inadequate Internet Connection
Here is the list of the possible causes of Orbi firmware update error, go through it meticulously and verify which reason stands valid for your case:
What sort of internet connection does your home have? While performing the firmware update, if the internet connection gets intermittent, then there are chances of an error showing up.
2. Distance between Orbi Router & Modem
The distance between the devices plays a vital role. How can we expect the Orbi router to receive signal from a far-placed modem? Both the devices won’t be able to communicate with each other. Maybe this is what is interrupting firmware update.
3. Faulty Connection
One more possible reason can be a faulty connection between the Orbi router and the modem. Probably the Ethernet cable connecting the devices has damages on it. If there is a wireless connection, then improper connectivity can lead to the Orbi firmware check error.
4. Orbi Router-Satellite Not Synced
Orbi router and satellite should be synced properly for them to perform well. Non-synced Orbi router and satellite could also be probably giving this firmware update error.
5. Power Outage
The chances are so that while you were in the process of the firmware update on your Orbi system, suddenly the power connection got interrupted. In such a situation, the firmware gets corrupted and you may get the error displayed.
By now you must be aware of the reasons pertaining to the Orbi system firmware update error. It is now time to move ahead with troubleshooting this issue.
Orbi Firmware Check Error: Troubleshooting
We know that you are eager to get this issue fixed, so without wasting any more minute of yours, let us get started with troubleshooting this issue.
1. Verify Internet Connection
Commence troubleshooting this problem by verifying the internet connection. Make sure that the Orbi router is connected to the modem. Also, check there is high-speed internet signal and proper range coverage. You may need to contact your ISP in case, there is an issue with the internet supply from their end.
2. Check Power Supply
Is your Orbi router getting a non-fluctuating power supply? Is the router even connected to the power socket? Is the power adapter or wall socket damaged? Make a check on all these factors and then proceed with updating Orbi firmware.
3. Reduce Distance Between the Devices
Relocate the Orbi router and the modem such that they are closer to each other. There needs to be smooth communication between them. That means the Orbi router should be able to receive an adequate signal from the modem.
4. Reconnect Orbi Router-Modem
If the connection between the devices is wired, then check the Ethernet cable for any damages or cuts. Moreover, check if it is inserted rightly into the ports. However, if there is a wireless connection, then reconnect them right away and ensure that the router is accessing the modem’s signal properly.
5. Check Sync Between Orbi Router-Satellite
Try syncing the Orbi router to the satellite again. To sync them, do this:
- Locate the Sync button on the Orbi router.
- Press it.
- Repeat the process with the satellite.
Hopefully, the Orbi firmware check error has been resolved with the above-mentioned troubleshooting tips. Once you are done with verifying and making changes as mentioned above, do the orbilogin and get ahead with Orbi firmware update. At any point in time, if you get stuck again while updating the firmware, get in touch with the technical team to get the issue fixed instantly.