Troubleshooting Orbi Satellite Not Connecting Issue Using Tips
Simple steps to setup the Orbi mesh system with the help of the your computer via Orbilogin.net or phone via Orbi app. But if you gets trouble related to the setup or connection, what will you do.
Are you getting troubles of the orbi satellites not connecting to router issue? You can get help from this blog, where you can find out reasons why it is happening. There are solutions with which you can solve the issues easily.
Reasons of Orbi Satellite Not Connecting
There are so many small technical errors that can trouble you similar issues like Orbi satellite not connecting to the Orbi router. We will share a list of the causing factors down here.
Router Not in Reach of Satellites
Placing the router near to modem is obvious decision, but if you place the Orbi satellites (child nodes) far away from router, then you will face troubles.
Electronic Devices are Blocking Signals
Electronic devices like microphones or microwave ovens can interrupt WiFi signals and also can cause connection between router and satellite.
Router Not Connected to Modem Correctly
Router is connected to the modem with the help of Ethernet cable, but if it is not connected to the correct ports then it is also a reason of disconnection.
Wrong Way of Pressing Sync Button
By pressing the Sync button after 2 minutes of the satellites will not help you to connect the satellites to the Orbi router.
So, these were the possible causing factors of Orbi satellites not connecting to the router. You should also learn about how to solve this above mentioned issue with simple tips and solutions, which are given down here.
Solutions to Fix Satellite Not Connecting
In this section of the blog post, you will get to learn how to dispel the Orbi satellite not connecting problem. We will provide tips and solution to troubleshoot the mentioned problem.
1. Place Satellite and Router Close
If the satellites are placed far from the WiFi router, then the devices can’t be connected. To make the connection without any wire, place the satellites close to the router.
2. Choose Optimal Location in Your Home
Locations in your house, which are close to the electronic devices, can interrupt WiFi signals that come from the router. So, choose that places in your house where no electronic devices are nearby.
3. Check Router to Modem Connection
You must make sure that the router is connected to the modem via Ethernet cable, which should connect in right ports. The pattern of the connection is router WAN port and modem LAN port.
4. Connect Satellite and Router Correctly
You must connect the satellite to the router correctly. At first, place the Orbi satellites on your desired locations and should be in reach of router. Press the Sync button on the router and within 2 minutes, press the satellite sync button.
5. Reboot Orbi Mesh System
You can restart the device by pressing the power button twice on the Orbi router device or unplug the power cord from the wall socket and plug it again.
6. Reset Orbi Router Device
To run a factory reset procedure on your Netgear Orbi device, you have to long press the RESET pinhole button. But after Orbi reset, you have to log into the interface again and start the new setup again.
End Note Lines
Here, you have gathered information about why your Orbi satellites not connecting to the router. We have also provided solutions to make the problem dispel easily.
