Netgear Orbi RBR50 Connection Issue: How to Fix?
Technical devices are unpredictable. They may ditch you at any point in time. Built with cutting edge technology, Netgear Orbi is no exception in this case. If you are having connection issue with your Netgear Orbi, then this guide is all that you need. Here you will find the ultimate fixes for the Netgear Orbi RBR50 connection issue. Whether the Orbi router does not connect to the internet modem, or you are having a problem connecting to its internet, everything is covered here. Read and follow the instructions.
Netgear Orbi RBR50 Connection Issue Addressed!!
If your Orbi begins creating troubles then you should try to reboot it once. This simple process works wonders in eliminating technical glitches, pushing software updates and refreshing the network. Thus, without giving a second thought, reboot it:
- Power off and unplug the Orbi router.
- Wait for some time and then plug it in back to switch it on.
Try connecting to its internet and see if the connection issue has been resolved or not.
Fix RBR50-Modem Connection
If the issue persists then this could be due to a faulty connection between the Orbi router and the internet modem. Orbi purple light is an indication that the connection is not secure. You should look at the connection and find what’s wrong here.
- Perhaps it’s a damaged cable or the cable is loosely inserted into the ports.
- Damaged or dirty ports are also responsible for the connection problem.
- Using incorrect ports in use can also be causing the problem.
What should be done?
- Replace the Ethernet cable is damaged. If it is fixable then fix it.
- Insert the cable tightly.
- Clean the ports with a soft brush and then insert the Ethernet cable.
- Use the correct ports to make the connection.
Supply Sufficient Power
Maybe the Netgear Orbi router or the internet modem is not powered on completely. This can also result in the Netgear Orbi RBR50 connection issue. Therefore, do this:
- Unplug the router or modem from its current power socket and plug it into another socket.
- Use the same power cord that came with the Orbi router in the package.
- The power cord should neither be loose nor damaged.
- Use a UPS in case there is a power outage.
Reset Orbi RBR50
If you are struggling with the same connection issue and no other solution has helped you then reset the router to the default factory settings. Resetting means to erase all the customized settings from the router. Once it is reset, it will return to the same condition it was in when you purchased it. Here’s how an Orbi router can be reset:
- Remove the Ethernet cable connecting the router to the modem.
- Using an object that’s sharp and pointed, press the Reset button inside the pinhole.
- The button is to be kept held for about 15 seconds or until the ring LED blinks amber.
- Release the button and wait.
Your Orbi is now factory reset. Give it a new start by setting it up again. Access the web interface using orbilogin.net. Use the default admin and WiFi credentials to complete the Orbi setup.
In the End
You may at any point in time come across the Netgear Orbi RBR50 connection issue. The effective solutions given in this post should help you out in resolving the problem quickly and easily.